Cobra 29 wx nw st/ RFX75

[RedNeck25]

hey guys new to the forum, wondering if someone can help
i have installed the RFX75 and it was fairly easy even with my experience, well i finished and checked it with my meter and it seems as it did nothing, i can still talk and everything is like normal, but the funny part is where i think its working this happened twice when i whistle or check the peak it has blown the power fuse going into my radio, but i was wondering if i did something wrong or if it has happened to you i followed the instructions on cbtricks.com which has worked for a lot of people.
thanks for your time
Nate

[RedNeck25]

i checked all solder points and everything i did, i blow the fuse when i key the mic, is there a note to change your fuse with the RFX75?

[RedNeck25]

well i removed my roger beep and my echo/reverb just trying to eliminate things still didn't fix the problem all i know is it is goin to end up being the rfx75 and that means buy a new one or put all my stuff back anyone ever have the rfx75 do this to their cb i know for a fact i wired it right?

[cb_repairman]

i checked all solder points and everything i did, i blow the fuse when i key the mic, is there a note to change your fuse with the RFX75?

Change the fuse to 10 amp. This is on the inline fuse.

[RedNeck25]

so to be clear CB power wire Fuse to 10amp/? what voltage. The RFX75 Fuse is a 10amp/250volt fuse do i make the power wire fuse the same

[RedNeck25]

well gave it a try and it worked but i am only pulling about 20 watts which should be around 100 or more i believe , but i tried talking to my buddy 1/2 mile away and my cb has really bad feedback and squeals if i try to talk, im just really confused b/c this was so easy to install and watching you cb_repairman on youtube it was just as easy im having serious problems and i have no idea why but i dont think i can turn back to stock. what a headache this is causing!!!

[cb_repairman]

Did you put the Jumper on the ground from the Audio Transformer?
Make sure you cut the Blue Cap out of the RFX unit too.

[RedNeck25]

yea i cut the blue capacitor off the RFX75 board and also did the jumper the audio transformer ground if im not mistaken its the 2 big solder points on the bottom of the cb board right? I also have noticed my lights dimm big time when i key or talk into the mic? im about ready to buy one of your Custom Cbs CB_Repairman. haha

[cb_repairman]

Post a picture of the back of the board and let me look at it.

[RedNeck25]

i put the images on your visitor messages it wont let me post here