I know its not a rig but i need help with my jeep.I'm losing spark at the coil.here is the problem.the wiring harness connected to the coil has 3 wires coming out of it 2 yellow and one green.the green is by itself and the 2 yellow on the other side are together.the green wire is loose inside of the harness causing me to stall and if i get out and wiggle it it fires right back up.is there a way i can tighten that wire down in the harness or do i need to replace it?the harness is one peice that doesn't come apart so i cant open.i don't want to mess with it too much because if the wire comes out im screwed unless there is a way to tighten it down