ED FORCE ONE
TB Veteran
- Credits
- 276
Uh Oh , now there is only 999,999 single axles at the company
Uh Oh , now there is only 999,999 single axles at the company
do you think the GPS said to go this way?
I dont work for Estes but I shocked y'all still use them. We stopped 10 years ago saving a ton of workers comp claims.
If that's actually the case, you get the dock supervisor to properly reload the trailer. Tip bar should only be necessary when just starting to load a trailer, not after it's done.I’ve never worked at a place that uses tip bars… how do you raise them to hook to the trailer if they actually happen to be supporting nose weight and keeping the trailer from tipping?
Tip bar is supposed to keep the weight of the forklift from tilting the trailer forward.I’ve never worked at a place that uses tip bars… how do you raise them to hook to the trailer if they actually happen to be supporting nose weight and keeping the trailer from tipping?
Ha ha ha like we can have access to the gear at some of these sardine can docks and yard , only 10 % of the trailers in the yard can be hooked without a spotter horse , complete nightmareIf there’s too much pressure to get the pin out, crank the gear in low a few times and it should ease the pressure off enough. That comes from guys setting them too low and not leaving a gap between the ground and the bar.
And it's very strange , no electric box !Tip bar is supposed to keep the weight of the forklift from tilting the trailer forward.
Our landing gear is a little further back because a good bit of our tractors are tandem axle. The central freight trailers we bought aren’t like this. If you have a tandem you’ll have to take your mudflaps off if you get one of those as your lead. They’re easy to spot - no tip bar and the landing gear is on the wrong side.
Gotta love the old union carrier yards, we had some at OD, the doors are set so close together because at the union lines the line drivers didn’t break sets and drop in doors, the yard horse did all of it.Ha ha ha like we can have access to the gear at some of these sardine can docks and yard , only 10 % of the trailers in the yard can be hooked without a spotter horse , complete nightmare
You’ll be assigned a tandem. You can ask the TM for a sleeper (usually a retired team truck) if you’re into that. You’ll still take your breaks at the hotel.Speaking of tractors, are the extraboard guys usually assigned a tractor or take whatever is out in the yard not assigned to schedule drivers?
After a whole lot of mudflaps got torn off they finally let us know to remove them on the old central trailers. One thing about ol Estes is the communication is lacking most of the time. A lot of stuff is learned after the fact.Tip bar is supposed to keep the weight of the forklift from tilting the trailer forward.
Our landing gear is a little further back because a good bit of our tractors are tandem axle. The central freight trailers we bought aren’t like this. If you have a tandem you’ll have to take your mudflaps off if you get one of those as your lead. They’re easy to spot - no tip bar and the landing gear is on the wrong side.
After a whole lot of mudflaps got torn off they finally let us know to remove them on the old central trailers. One thing about ol Estes is the communication is lacking most of the time. A lot of stuff is learned after the fact.
His tractor was thirsty…
I got assigned an old Central Freightliner with no radio or passenger seat. Tractor goes 70 mph.Speaking of tractors, are the extraboard guys usually assigned a tractor or take whatever is out in the yard not assigned to schedule drivers?
9.25 per drop, 9.25 or hook. 10.00$ extra per dispatch over 10 dispatches in a week.Curious if somebody can explain to me the drop and hook pay it at Estes I do (2) meet and turn and most of the time my pops are hooked up prior to my second turn so what are we get 8.50 times 4. ?
I always heard it was because trailers weren’t 102” wide in the 50’s and 60’s when these docks were built, the trailers were only 96” wide, giving you another foot to work….Gotta love the old union carrier yards, we had some at OD, the doors are set so close together because at the union lines the line drivers didn’t break sets and drop in doors, the yard horse did all of it.